Page | 1
.
Recommended Tools:
Metric Socket Set
Metric Wrench Set
INSTA
LLATI
ON INS
TRU
CT
IO
NS A
N
D INFOR
MA
TIO
N
Congratulations on your purchase of Tusk 5 Point SFI Approved
Safety Harness. This product is made to handle extreme riding conditions.
Please take note of the information and instructions below to get the most
out of your Tusk Product.
For instructional videos, refer to
www.rockymountainatvmc.com/videos
INSTA
LLATI
ON INS
TRU
CT
IO
NS A
N
D INFOR
MA
TIO
N
Tusk 5 Point SFI Approved Safety Harness
Disclaimer:
Riding off-road can be dangerous and could lead to serious injury or death. No warranty of representation is
made as to the products ability to protect the user from any injury or death. By purchasing this product, the user
assumes that risk. The acceptance and/or use of this product purchased from Tusk Off-Road by the customer hereby
shall release Tusk Off-Road from any and all liability pertaining to the use of such product.
Important:
Existing mounting locations must be used to mount the seat belt straps. SAE grade 8, Metric grade
10.9 or higher hardware is required for mounting. Be sure to check for sharp corners that could potentially
damage the straps. Improper mounting could cut or damage the straps.
Warning:
Seat belts must be properly worn at all times while the vehicle is in operation.
Always inspect belts, mounting points, buckles, and hardware prior to use.
REPLACE any belts that are torn, damaged, or fraying. DO NOT operate machine if harness is
damaged in any way.
Use mild soap and water for cleaning the harness.
SAE Grade 8, Metric 10.9, or higher hardware is required for mounting.
