Page 2 of 3
TS301A Rev F
3.
Assemble cylinder cover
Slide cylinder (A) up through cylinder (B)
(see fig 1). With cylinder (A) engaged with
cylinder (B), slide cylinder (C) down over
cylinders (A and B) (see fig 2). Refer to
fig. 3 for completed assembly.
For installation of optional stool kit
insert the gas cylinder into the
foot ring and tighten (fig 1).
Push the gas cylinder into the
base (fig 2).
4.
Place cover over the cylinder in base (fig. 2)
5.
Attach seat to cylinder
Line up hole over cylinder, and place seat
down. By grabbing the seat, firmly push
the entire chair towards the floor to properly
lock the tapers on the cylinder into the seat
and the base.
fig. 1
fig. 2
fig. 3
A
B
C
Fig. 2
Fig. 2
6.
Attach back to control
Remove the bolt from the
control (Fig. 1). Tighten
the seat bolt, as shown (Fig. 2).
Fig. 1
Fig. 2
A
B
C
A
B
A
B
C
Fig. 1
