background image

© Trynex International 2008      L1305

1 — 42

Warranty 

Limited Warranty

 

One year warranty on Turfex brand products against defects in material or workmanship 

under normal use and service, subject to limitations detailed below. Warranty period of year

of one year begins on the date of purchase by the original retail user.
 The 

WARRANTY REGISTRATION CARD

  must be returned to the manufacturer for this warranty 

to become effective. This warranty applies to the original retail purchaser only. This warranty does 

not cover damages caused by improper installation, misuse, lack of proper maintenance, alterations 

or repairs made by anyone other than authorized Trynex dealers or Trynex personnel. Due to the 

corrosive properties of the materials dispensed by spreaders, Trynex does not warrant against 

damage caused by corrosion. Warranty claims by the user must be made to the dealer from where 

the product was purchased, unless otherwise authorized by Trynex. Trynex reserves the right to 

determine if any part is defective and to repair or replace such parts as it elects. This warranty does 

not cover shipping costs of defective parts to or from the dealer.

LIMITATION OF LIABILITY

 

Neither Trynex, nor any company affiliated with it, makes any warranties, representations for 

promise as to the performance or quality other that what is herein contained. The liability of Trynex 

to the purchaser for damages arising out of the manufacture, sale, delivery, use or resale of this 

spreader shall be limited to and shall not exceed the costs of repair or replacement of defective 

parts. Trynex shall not be liable for loss of use, inconvenience or any other incidental, indirect or 

consequential damages, so the above limitations on incidental or consequential damages may not 

apply to you.

NO DEALER HAS AUTHORITY TO MAKE ANY REPRESENTATION OR PROMISE ON BEHALF OF 

TRYNEX INTERNATIONAL, OR TO ALTER OR MODIFY THE TERMS OR LIMITATIONS OF THIS 

WARRANTY IN ANY WAY.

R

Rev. 01

Summary of Contents for MS-1875













































Reviews: