turck TN-UHF AUS-CDS Series, Instructions For Use Manual

Page: 45 / 225

V02.00 | 2020/08
45
7.1.10 Setting the air interface parameters – EPC Class 1 Gen 2
The EPC Class1 Gen2 tab is used to set the EPC Class1 Gen2 parameters for the air interface.
The parameters set are used if the read/write head performs an Inventory command. All para-
meters and the settable values are written in the DTM.
Example: set the tag reset
The tag reset function makes it possible to set how often a tag returns a signal to the read/write
head with an Inventory operation. The tag reset function is only useful in single-tag applica-
tions.
„ EPC Class 1 Gen 2
Ò
Inventory
Ò
Inventory profile 1: Transponder reset
Ò
enter
value (here: 150 ms).
Fig. 39: Setting the tag reset