turck TN-UHF AUS-CDS Series, Instructions For Use Manual

Page: 160 / 225

Setting
RFID channels – overview of the commands
160
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
8.5.1 Command: Idle
The Idle command switches the interface to Idle mode. The command execution is aborted. In
UHF applications the EPC is indicated if the read/write head is assigned parameters directly in
Presence sensing mode via the DTM.
Request
Loop counter Not required
Command code 0x0000 (hex.), 0 (dec.)
Read/write head address Not required
Length of EPC Not required
Start address Not required
Length Not required
Command timeout Not required
Write fragment no. Not required
Read fragment no. Not required
Write data Not required
Response
Loop counter See description of the input data, [
}
152]
Response code 0x0000 (hex.), 0 (dec.)
Length Length of the EPC of the tag in the detection range
Error code See description of the input data, [
}
152]
Tag within the
detection range See description of the input data, [ } 152]
Data (bytes) available See description of the input data, [ } 152]
Tag counter See description of the input data, [ } 152]
Write fragment no. Size of the fragments
Read fragment no. Size of the fragments
Read data, Bytes 0…n EPC of the tag in the detection range