turck TN-UHF AUS-CDS Series, Instructions For Use Manual

Page: 139 / 225

V02.00 | 2020/08
139
7.11.5 Transfer process data from CODESYS to the cloud
The process data of the device (TN-UHF-…-CDS) from a CODESYS project is transferred via a
symbol configuration in the CODESYS project to the Turck Cloud.
„
Add the symbol configuration in the CODESYS project via Application
Ò
Append object
Ò
Symbol configuration to the project. The symbol configuration contains all the vari-
ables used in the project.
„
Select the variables to be displayed in the web server and in the cloud, and define in the
Access rights column whether the variables in the cloud are to be only read, written or
read and written. Only read access is possible in the web server in the area CLOUD
Ò
Portal
Ò
Nodes (see Cleaning nodes [
}
140]).
Fig. 136: Symbol configuration
NOTE
If access rights were assigned in CODESYS, the appropriate access data must be
entered in the web server (see [
} 140]).