Installing
Installing rectangular devices
12
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com
5.2
Installing rectangular devices
Install the device with the appropriate fixing accessories so that the front cap of the
devices fully protrudes from the surrounding area.
Observe the minimum distances between read/write heads.
Fig. 6: Mounting distances
Avoid metal in the proximity of the read/write head. Metal rails or similar objects must
not intersect the transmission zone.
Protect the device from heat radiation, rapid temperature fluctuations, severe contamin-
ation, electrostatic charge and mechanical damage.
