turck TBPN-L5-4FDI-4FDX, Instructions For Use Manual

Page: 71 / 78

V01.00 | 2020/07
71
Configuration Module
behavior Diagnostics
In device External
memory Device/
memory
Valid Valid unequal Device start
Ò
Device running
Configuration miss-
match, see „Memory
and F-Config
Status” [
} 65]
Valid No memory
chip plugged - Device start
Ò
Device not running
No memory chip
plugged, see „Memory
and F-Config
Status” [
} 65]
Valid Memory chip
pulled - During operation No memory chip
plugged, see „Memory
and F-Config
Status” [
}
65]
changed
during
operation Valid unequal During operation
Ò
The new configuration
is checked.
Ò
Loading the configura-
tion from the memory to
the device
-
9.6 Reset the device to factory settings (factory reset)
NOTE
Sets the device and the plugged memory chip to factory settings, the content of the
memory stick is deleted.
„ Plug the memory chip into device.
„ Set the rotary coding switches to 900 (Factory Reset).
„
Execute a power cycle at the device.
a
The device as well as the plugged memory chip are reset, stored configuration is deleted.
a The procedure completed as soon as the ERR LED stops blinking.