turck TBIP-L...-FDIO1-2IOL Series TBIP-L4-FDIO1-2IOL, Instructions For Use Manual

Page: 39 / 165

31
2018/02
TBPN-L1
-FDIO1-2IOL- Saf
e
I/O
5 Connecting
5.1 Connecting the M12 Connectors
When connecting the cables to the M12-connectors, please use the torque screwdriver mentioned
below.
Description Type Ident no.
Torque screwdriver,

Torque range 0.4

1.0 Nm
–
M8 (SW9)
–
M12 for bus cables (SW13)
–
M12 for sensor cables (SW14)
Torque-Wrench-Set-
Bus 6936171
5.1.1 Assuring Protection Class (IP67/IP69K)
Protection of 7/8'' Connectors (power supply)
The 7/8'' dust caps delivered with the device cannot guarantee IP67/IP69K.

Seal unused 7/8'' connectors with protection caps which guarantee the protection class.
Suitable protection caps can be found on www.turck.de under "Products

Fieldbus technology

Accessories".
Protection of M12 Connectors (Ethernet and Sensors/Actuators)
Protection caps for the M12 connectors are part of the device's scope of delivery but can also be
ordered separately: under "Products

Fieldbus technology

Accessories".

Seal unused M12 connectors with protection caps which guarantee the protection class.

Observe the admissible tightening torque of 0.5 Nm.
WARNUNG!
Leakages in the housing
Material and personal damage because of malfunction due to penetrating materials

Always seal unused connectors with respective protection caps. Otherwise the protec-
tion class IP67/IP69K cannot be guaranteed.