27
2018/02
TBPN-L1
-FDIO1-2IOL- Saf
e
I/O
4
Mounting
Mount the device on a pre-drilled and grounded mounting surface.
The mounting screw connects the functional earth with FE, if the mounting surface is grounded.
ACHTUNG!
Mechanical stress in the device
Danger of material damage
Mount the device onto an even mounting surface
4.1
Mounting Material
Two mounting screws (M6)
The length of the mounting screws depends on the way of mounting and the mounting surface
ACHTUNG!
Wrong mounting screws
Danger of material damage
Select the mounting screws always according to the quality of the mounting surface.
.
4.2
Mounting the Device
Adjust the module and fix it with two mounting screws (M6).
The maximum tightening torque is 1.5 Nm.
The lower mounting screw connects the functional earth with FE at the device.
Fig. 6: Mounting the device
218 [5.58]
M6 (2x)
max. 1.5 Nm
Summary of Contents for TBIP-L...-FDIO1-2IOL Series TBIP-L4-FDIO1-2IOL
Page 1: ...Your Global Automation Partner TBIP L FDIO1 2IOL Safety Block I O Module Instructions for Use...
Page 2: ...2 Hans Turck GmbH Co KG T 49 208 4952 0 F 49 208 4952 264 more turck com www turck com...
Page 118: ...Hans Turck GmbH Co KG T 49 208 4952 0 F 49 208 4952 264 more turck com www turck com 2...