25
2018/02
TBIP-L…-FD
IO1-2
IOL- Safe I/
O chann
e
ls
3.8.4
Deleting the Memory Chip
The content of the memory chip can either be deleted by using the rotary coding switches or via the
Turck Safety Configurator.
Deleting the Configuration via Rotary Switch Setting (901)
Plug the memory chip into device
Set the rotary coding switches to 901 (Erase Memory)
Execute a power cycle at the device
The content on the memory chip is deleted.
The procedure completed as soon as the ERR LED stops blinking.
Deleting the Configuration via Turck Safety Configurator
Select the function "Monitor operations
Clear configuration" in the Turck Safety Configurator,
Fig. 5: Deleting the configuration via Turck Safety Configurator
The configuration on the memory chip is deleted.
The procedure completed as soon as the ERR LED stops blinking.
Summary of Contents for TBIP-L...-FDIO1-2IOL Series TBIP-L4-FDIO1-2IOL
Page 1: ...Your Global Automation Partner TBIP L FDIO1 2IOL Safety Block I O Module Instructions for Use...
Page 2: ...2 Hans Turck GmbH Co KG T 49 208 4952 0 F 49 208 4952 264 more turck com www turck com...
Page 118: ...Hans Turck GmbH Co KG T 49 208 4952 0 F 49 208 4952 264 more turck com www turck com 2...