turck TBIP-L...-FDIO1-2IOL Series TBIP-L4-FDIO1-2IOL, Instructions For Use Manual, Page: 150 / 165

Properties of the IO-Link channels
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com 24
2.9 Using IO-Link and Turck Device DTMs
2.9.1 Topology Scan
The Topology Scan in PACTware also allows the read-in of an IO-Link configuration down to the IO-
Link device.
IO-Link devices, known in PACTware, are added to the IO-Link ports of the master.

Therefore, either the respective sensor DTMs in PACTware or the sensor IODDs via IODD DTM Con-
figurator have to be installed.
Fig. 2: Topology Scan in PACTware
TECHNISCHE GRUNDLAGEN
FDT enables a fieldbus and system independent engineering environment to be set up.
Generic DTMs allow any type of sensor and actuator to be integrated easily in the system.