turck TBIP-L...-FDIO1-2IOL Series TBIP-L4-FDIO1-2IOL, Instructions For Use Manual

Page: 113 / 165

105
2018/02
TBPN-L1
-FDIO1-2IOL- Saf
e
I/O
11 Maintenance, repair, decommissioning and disposal
11.1 Maintenance
The TBIP-L…-FDIO1-2IOL is maintenance-free for the duration of use of 20 years.
Used cables as well as connected sensors and actuators have to be tested according to vendor spec-
ifications during the TBIP-L…-FDIO1-2IOL’s duration of use.
11.2 Repair
It is not possible to repair the TBIP-L…-FDIO1-2IOL.
In the event of an error, send the device back to Turck.
11.3 Decommissioning
The machine manufacturer is responsible for decommissioning the device.
When decommissioning a device ensure that the TBIP-L…-FDIO1-2IOL is reused as intended.

Please observe the storage and transport requirements according chapter 3.4.2 , General techni-
cal data (page 16) .
11.4 Disposal
Defective or faulty devices must not, in any event, be put back into circulation.
Send them back to Turck for testing and disposal.