turck TBEN-S2-2COM-4DXP, Instructions For Use Manual

Page: 140 / 171

Operating
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com 134
Receive Data of the Modbus Servers COM0/COM1
Depending on the parameterization, 1 or 12 registers are received per Modbus-Server.
MB-Server Timing
9.1.3 Evaluating Process Input Data –DXP Channels
Meaning of the Status Bits – DXP Channels
Register Bit 15… Bit 0
Dec. Hex. MSB LSB
n n Input register 0 of the 1st Modbus-Server
… … …
n + 11 n + 0x0B Input register 11 of the 1st Modbus-Server
n + 12 n + 0x0C Input register 0 of the 2nd Modbus-Server
… … …
n + 23 n + 0x17 Input register 11 of the 2nd Modbus-Server
… … …
n + 84 n + 0x54 Input register 0 of the 8th Modbus-Server
… … …
n + 95 n + 0x5F Input register 11 of the 8th Modbus-Server
Process value Description
MB-Server Timing (*1 ms) Update time [ms] of the connected Modbus RTU-Servers at COM0 or COM1.
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Dec. Hex.
464 0x01D0 Input value
Ch7
Input value
Ch6
Input value
Ch5
Input value
Ch4
reserved
Process value Value Description
Input value Chx 0 no input signal
1 input signal at DXP channel