40
4.2.2 Generic device and QC_ON configuration
The procedure:
In the
Controller Organizer
, right-click on
Ethernet
to display a drop-down menu.
Click
New Module
to open the
“Select Module Type”
configuration page
Enter
“Generic”
in the search area, highlight the
Generic Ethernet Module
and click
Create
Enter the
Name
,
Description
and
IP Address
in the
New Module
page
Select the
Input Data – INT
data format in the
Comm Format
field
Enter the
Connection Parameters
as seen in the following figure
Click OK and download configuration to the PLC
Figure 4.14 – TBEN QC-ON configuration
4.2.3 Generic device and QC_OFF configuration
Repeat procedure as described above
Enter the
Connection Parameters
as follows:
Figure 4.15 – TBEN QC-OFF configuration
Summary of Contents for TBEN-LH-8IOL
