V2.0 | 2021/06
17
5.2
RU200-CP40 – changing the active face
The active face can be set in five different directions:
n
Active face front (as supplied)
n
Active face left
n
Active face right
n
Active face up
n
Active face down
Undo the locking screws.
Pull the sensor from the connection socket (A).
Optional: Undo the screws on the sensor.
Optional: Remove the adapter bracket and turn it 180°.
Optional: Fasten screws on the sensor.
Align the plug connector.
Fit the sensor in the connection socket and tighten the locking screws.
6.3 mm
4 mm
Fig. 18: Undoing the locking screws
Fig. 19: Pulling the sensor from the connection
socket
6.3 mm
4 mm
Fig. 20: Optional: Undoing the screws on the
sensor
Fig. 21: Optional: Removing the adapter
bracket and turning it 180°
Max. 315°
6.3 mm
4 mm
Fig. 22: Optional: Fastening screws on the
sensor
Fig. 23: Aligning the plug connector
