
Installing
RU200-CK40 – changing the active face
16
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
5.1
RU200-CK40 – changing the active face
The active face can be set in five different directions:
n
Active face front (as supplied)
n
Active face left
n
Active face right
n
Active face up
n
Active face down
Undo the locking screw.
Pull the sensor from the mounting bracket.
Undo the screws on the sensor.
Remove the adapter bracket and rotate 180°.
Re-tighten the screws on the sensor and align the male connector if necessary.
Fit the sensor and the mounting bracket and tighten the locking screw.
2x
Fig. 12: Undo the locking screw Fig. 13: Pull the sensor out of
the mounting bracket
Fig. 14: Undo the screws on
the sensor
1.
2.
2x
0.7 Nm
Max. 315°
Fig. 15: Remove the adapter
bracket and rotate 180°
Fig. 16: Tighten the screws on
the sensor and align the male
connector
Fig. 17: Fit the sensor and the
mounting bracket and tighten
the locking screw