turck LUS211 Series, Instructions For Use Manual, Page: 23 / 41

V01.00 | 2021/11
23
9.2.5 Setting parameter values via touchpads
Turck standard menu
„ Unlock the device when [MODE] or [SET] is touched, a red running light appears and the
LOC LED is lit.
„ Touch [MODE] or [SET] until the required parameter is displayed.
„ Touch [ENTER] to select a parameter.
„ Changing the displayed value: Touch [SET] for 3 s until the display is no longer flashing.
Or: Touch [MODE] in order to return to parameter selection.
„ Increase or decrease the value incrementally via [MODE] or [SET]. Certain values can be
changed by continuously touching [MODE] or [SET].
„
Touch [ENTER] to save the modified value. The saved value flashes twice.
E
Main Menu
EF Menu
Run Mode
Chosen
parameter
Current value
Save value
Lower value
Current value
Higher value
Acceleration
Acceleration
E
E M
Next
parameter
M
M
S
> 3 s
M
Gradually
S
Gradually
S
M
Held
Held
E
M S +
Fig. 18: Setting parameter values
VDMA menu
„
Unlock the device when [MODE] or [SET] is touched, a red running light appears and the
LOC LED is lit.
„
Touch [MODE] or [SET] until the required parameter is displayed.
„
Touch [ENTER] to select a parameter.
„ Increase or decrease the value incrementally via [MODE] or [SET]. Certain values can be
changed by continuously touching [MODE] or [SET].
„ Touch [ENTER] to save the modified value. The saved value flashes twice.
E
Main Menu
EF Menu
Run Mode
Chosen
parameter
Save value
Lower value
Current value
Higher value
Acceleration
Acceleration
E
E M
Next
parameter
M
M
M
Gradually
S
Gradually
S
M
Held
Held
E
M S +
Fig. 19: Setting parameter values