V01.00 | 2021/11
17
9
Setting and Parameterization
9.1
Settable functions and features
Setting options via touchpads and IO-Link interface
The following functions and properties can be set and used both in standard I/O mode as well
as in IO-Link mode:
n
Locking/unlocking the device
n
Window function
n
Hysteresis function
n
Analog range
n
Advanced settings:
– Reset to presettings
– Reset to factory settings
– Measured variable and unit
– Container geometry
– Minimum and maximum value memory
– Display color and behavior
– Password setting
Other setting options via IO-Link
The following additional functions and properties can be set and used via the IO-Link interface:
n
OUT1 output configuration for SIO mode: PNP/NPN, automatic detection on/off
n
OUT2 output configuration for SIO mode: PNP/NPN, automatic detection on/off
n
Setting display units for IO-Link mode: metric, imperial
n
Lock data storage on IO-Link master
n
Fully lock user interface (display and touchpads locked)
n
Lock parameters (parameters are displayed but cannot be changed)
n
Operating hours counter including warning limits
n
Muting: Switching sonic transducers on and off to synchronize multiple sensors in the
application via the controller
Auto sensing function
When connected to an I/O module, the auto sensing function enables the device to support the
set switching output behavior (PNP/NPN) or analog output characteristics. The auto sensing
functions are activated by default.