turck BL67-GW-PN-AC, User Manual, Page: 82 / 119

Connection of the PROFINET gateway to a Siemens PLC S7
D301239 1013 - BL67 AIDA PROFINET 5-16
Configuring the neighborhood detection
A neighbor-port can be assigned to each Ethernet-port of a device. In case of a device exchange, this
port is then used to assign the IP-address and the device name to the new device.
The definition of the partner-port is done either in the properties of the devices' Ethernet-ports or
directly in the PROFINET Topology Editor (see
page 5-17 ).

Neighborhood assignment via port-configuration
Selection of the port at the neighboring device to which this port is physically connected.
Figure 5-18:
Neighborhood
assignment at
port 1 of the BL67
gateway
(example)