turck BL67-GW-PN-AC, User Manual, Page: 109 / 119

D301239 1013 - BL67 AIDA PROFINET
8-7
Dismounting a BL67-station
8.3 Dismounting a BL67-station
8.3.1 Dismounting from the mounting plate
The BL67 stations are dismounted from the mounting plate by loosening all screws at the station.
8.3.2 Dismounting from the mounting rail
Please observe the following basic rules when dismounting:
Dismounting of a single component

The gateway can only be dismounted from a station after all the base modules located on its right
are dismounted.

Individual base modules can only be removed from a station when all base modules located to its
right have been dismounted.
Dismounting an entire BL67 station in chronological order

Switch off the power to the distribution modules.

Pull the electronic modules.

Disconnect wiring.

Loosen/remove end brackets.

Dismount base modules.

Dismount gateway.
Note
The complete station should be dismounted from the mounting plate or the mounting rail
before disassembling it.
Danger
Before dismounting a base module, the supply voltage to the relevant power distribution
modules must be switched off. All wires must be disconnected.