15
2018/03
Removing the Grounding Clamp
Use a flat standard screwdriver to lever the grounding clip upwards and remove it.
Mounting the Grounding Clamp
Insert the grounding clamp between the fieldbus connectors (using a screwdriver if necessary)
so that it makes contact with the metal housing of the connector.
The shielding of the fieldbus lines is now connected to the grounding clamp.
4.2
FEN20-EN1
Connecting the Devices to Ethernet
For the connection to Ethernet the device has two 2-pin RJ45 ports.
Fig. 6: Removing the grounding clamp
Fig. 7: Mounting the grounding clamp
Fig. 8: RJ45-ports
