Commissioning
Parameterizing readers with the DTM
40
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com
7.1.11
Setting the RSSI filter – post read filter
The
Post read filter
tab enables parameters to be set in order to filter event messages.
The set filters do not reduce the data traffic on the air interface and are not suitable for multi-
tag applications with many tags or high passing speeds. All parameters and the settable values
are written in the DTM.
Example: set the RSSI filter
An RSSI filter makes it possible to prevent unwanted read operations. All read operations with
an RSSI outside of the set limit values are filtered out and not displayed.
At
Post read filter
Ò
RSSI filter
switch on the RSSI filter.
Fig. 38: Switching on the RSSI filter
Summary of Contents for 100000897
