8 TurboLock TL - 500PR
Section 4
Installation
•
If your place of residence and/or installation location is not solely your property, seek permission from the property owner
before attempting any type of drilling.
•
Do not under any circumstances use a standard drill. This may cause severe damage to the tool and/or result in personal
injury. Use a hammer drill and/or a type of drill suited for use with the type of material you are drilling through.
•
It is recommended to measure the drill bit from the end. Tape off the bit so that 50mm (about 2 in) is left exposed. This will
help you know when you have drilled deep enough into the ground.
•
When driving any type of vehicle, be advised to avoid bumping or knocking down the lock.
Step 1.
Lift the arm then use the included keys to unlock the Cover and set it aside.
Step 1
