Turbolock TL-100 User Manual Download | Manualshive

Page: 25 / 36

background image

TurboLock TL - 100 25

Step 2.

Enter

‘8’

then enter

‘#’

.

Step 3.

Move the card in front of the keypad. The lock will emit sound when it detects the card. Additional cards (up to 20 at a

time) can be deleted as desired.

Step 4.

Wait for the backlight to go out so that the new card is successfully deleted.

Step 5.

If desired, test the card to confirm it was deleted.

Step 6.

Repeat the above steps to add additional cards if needed.

A single card cannot be deleted if it has been lost or misplaced. If lost or misplaced cards need to be

deleted, they may only be deleted by deleting all cards.

Deleting all Cards
Step 1.

Use the keypad to enter the Admin Password then enter

‘#’

.

Step 2.

Enter

‘9’

then enter

‘#’

.

Step 3.

Wait for the backlight to go out to confirm all cards were successfully deleted.

Step 4.

If desired, test a card to confirm it was deleted.

Step 5.

Repeat the above steps to add additional cards if needed.

The card must be added while the blue backlight is on. If it goes out, begin again at Step 1.

Section 8

Using the Passive Function

With this function active, the TL-100 can be used to open the door without requiring a password or card etc.

USE WITH CAUTION. Remember to turn off the function when it is no longer needed. Do not leave this function on for

extended periods of time.

«
...
23
24
25
26
27
...
»

Summary of Contents for TL-100





































Reviews:

No comments

Related manuals for TL-100

Corbin Russwin Access 800 Series

Brand: Assa Abloy Pages: 20

ARCOS UNIVERSAL PT 30

Brand: Dorma Pages: 2

Brand: Kaba Mas Pages: 17

DEADBOLT EDITION SECURE PGD728

Brand: Lockly Pages: 17

Brand: Burg Pages: 5

Brand: Lamp Pages: 2

Brand: Kwikset Pages: 4

Brand: Von Duprin Pages: 2

Brand: ZKaccess Pages: 10

Brand: ZK Technology Pages: 47

87H2R1002524170

Brand: Richelieu Pages: 4

Brand: ilco Pages: 2

Brand: Stock Loks Pages: 1

Brand: Yeeka Pages: 18

Brand: AmazonBasics Pages: 3

Brand: HARFO Pages: 22

Brand: Yale Pages: 2

Real Living YRD220

Brand: Yale Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands