TurboLock TL - 100 21
Step 4.
Plug the cable into the inside section via the white connectors.
(Fig. 25)
Step 5.
Position the inside section over the plate and use the 3x inside screws to fasten it to the door.
(Fig. 26)
Step 6.
Add batteries to the compartment then slide the cover over it.
(Fig. 27)
Step 7.
The lock should now be ready to use. It’s highly recommended to use the default password and the app to test the
lock to make sure it works before closing the door. See Section 6 for information on the default admin password. See
Section 10 for information on the app.
Section 5
Using the Lock
In general, there are two simple ways to use the lock to unlock your door.
Each time the lock engages and unlocks the door, regardless of entry method, the door can only be opened while the
backlight is still on. This light remains on for approximately 10 seconds. After it turns off, the lock will automatically
engage again and lock the door.
(Fig. 26)
(Fig. 25)
(Fig. 27)
