TurboLock TL - 100 13
Step 4.
Plug the cable into the inside section via the white connectors.
(Fig. 12)
Step 5.
Position the inside section over the plate and use the 3x inside screws to fasten it to the door.
(Fig. 13)
Step 6.
Add batteries to the compartment then slide the cover over it.
(Fig. 14)
Step 7.
The lock should now be ready to use. It’s highly recommended to use the default password and the app to test the
lock to make sure it works before closing the door. See Section 6 for information on the default admin password. See
Section 10 for information on the app.
Section 4
Installation (New)
This section details installation steps needed if you are installing the TL-100 on a door without a cutout. If you are
using the TL-100 to replace an old lock or if your door otherwise already has a cutout, please go back to page 8.
• For easier installation, have another person help to hold the lock etc.
• For your convenience, installation instructions are broken into segments. Read and follow the instructions for both Pre-
Installation and Main Installation.
(Fig. 13)
(Fig. 12)
(Fig. 14)
