TurboLock TL - 100 11
Step 2.
On the back of the outside section, use the square
latch pin to turn the center mechanism so that the
arrow is pointing up.
(Fig. 7)
Step 3.
Remove the latch pin.
3.2 Main Installation
Step 1.
Start with the outside section. Feed the cable under the latch
and thread two of the pegs through the latch; the upper and
lower pegs should be above and below the latch. If
needed, have someone hold the door itself or hold
the outside section flat against the front of the door.
(Fig. 8)
It’s highly recommended to leave the door open
during installation.
(Fig. 8)
(Fig. 7)
Arrow
