background image

 

 

Children must not be in the kitchen when the hob is in use. 

 

 

After use, when the cooking element or entire hob is turned off, a residual heat indicator 
will come on, showing an H (hot) for each cooking area that was used: this indicates that 
the corresponding cooking area is still dangerous. 

 

 

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent 
or similarly qualified persons in order to avoid a hazard. 

 

 

WARNING:

 If the surface is cracked, switch off the appliance to avoid the possibility of 

electric shock. 

 

 

A steam cleaner is not to be used. 

 

 

Metallic objects such as knives, forks, spoons and lids should not be placed on the hob 
surface since they can get hot. 

 

 

the appliance is not intended to be operated by means of an external timer or separate 
remote-control system. 

 

 

Danger of fire: Do not store items on the cooking surfaces. 

 

 

CAUTION

: The cooking process has to be supervised. A short term cooking process has 

to be supervised continuously. 

 

 

WARNING:

 Use only hob guards designed by the manufacturer of the cooking appliance 

or indicated by the manufacturer of the appliance in the instructions for use as suitable 
or hob guards incorporated in the appliance. The use of inappropriate guards can cause 
accidents. 

 

 

This appliance can be used by children aged from 8 years and above and persons with 
reduced physical, sensory or mental capabilities or lack of experience and knowledge if 
they have been given supervision orinstruction concerning use of the appliance in a safe 
way  and  understand  the  hazards  involved.  Children  shall  not  play  with  the  appliance. 
Cleaning and user maintenance shall not be made by children without supervision. 

 

 

Means for disconnection must be incorporated in the fixed wiring in accordance with the 
wiring rules. 

 

 

WARNING:

 The appliance and its accessible parts become hot during use. 

Care should be taken to avoid touching heating elements. 
Children less than 8 years of age shall be kept away unless continuously supervised. 

 
 
 

After use, turn off the hob using the command device and do not rely on 
the pan detector. 
 

Summary of Contents for TIA732


















Reviews: