12
7. Turn on all batteries with the power button (On/Off) for 2-4 seconds.
For more information read the attached Lithium Series 5.1kWh battery manual.
4.5. Commissioning
Once you are finished with all connections, the machine is ready to commission.
It will proceed as follows:
1.
Reset the DC and AC protections at the back of the cabinet.
2.
Start the Batteries. To do this, press the Power button (On/Off) for 2-4
seconds. The BMS will start, and both the LCD screen and the power
button will light up.
3.
Connect the loads as specified in the previous scheme, and ready for
service.
Cable de comunicaciones
entre baterías
Cable de comunicaciones
entre baterías
INVERSOR