Direction for use
1
USE AND CARE GUIDE
EXTERIOR WALL FIXTURE
MEZZO LED M1008A
We appreciate the trust and confidence
you have placed in our company through the
purchase of this exterior wall fixture.We strive
to continually create quality products designed
to enhance your home.Visit us online to see our
full line of products available for your home
improvement needs.Thank you for choosing our
company
’
s product.
Safety Information
1,Before starting installation of this fixture or
removal of a previous fixture, disconnect the
power by turning off the circuit breaker or by
removing the fuse at the fuse box.
2,Consult a qualified electrician if you have any
electrical questions or need to replace the
bulb/driver.
3,If you have nay non-electrical questions about
this fixture, please contact our customer service
team through our website.
______________________________________
Warranty
The manufacturer warrants this lighting fixture to be
free from defects in materials and workmanship for a
period of five (5)years from date of purchase.This
warranty applies only to the original consumer
purchaser and only to products used in normal use
and service.If this product is found to be defective,the
manufacturer
’
s only obligation and your exclusive
remedy,is the repair or replacement of the product at
the manufacturer
’
s discretion,provided that the
product
has
not
been
damaged
through
misuse,abuse,accident,modifications,alteration,negle
ct or mishandling.
____________________________________________
Pre-Installation
PLANNING THE INSTALLATION
Read all instructions before assembly and
installation.Before starting installation of the
fixture
or
removal
of
a
previous
fixture,disconnect the power by tuning off the
circuit breaker or by removing the fuse at the
fuse
box.To
avoid
damaging
this
product,assemble it on a soft,non-abrasive
surface such as carpet or cardboard.
TOOLS REQUIRED
Philips Screwdriver,Flathead Screwdriver,Wire
Cutter,Wire Stripper,Silicon Rubber Sealant for
exterior
use,Ladder,Electrical
Tape,Safety
Goggles.
Installation
1 Mounting the hardware
◼
Thread the fixture mounting screws into
the provided holes of the mounting
