background image

TNT SERIES PRESSURE WASHER  

OPERATOR’S MANUAL

3

INTRODUCTION

Thank you for purchasing a TNT Pressure Washer.

This manual covers the operation and maintenance of
the TNT-503021E, TNT-503021E/G, TNT-503531E, TNT-
503531E/G, TNT-603531E, TNT-603531E/G, TNT-
503061E and TNT-503061E/G washers. All information
in this manual is based on the latest product information
available at the time of printing.

Landa, Inc. reserves the right to make changes at any
time without incurring any obligation.

The TNT Series was designed for maximum

use of 8 hours per day, 5 days per week.

Owner/User Responsibility:

The owner and/or user must have an understanding of
the manufacturer’s operating instructions and warnings
before using this Landa pressure washer. Warning infor-
mation should be emphasized and understood. If the op-
erator is not fluent in English, the manufacturer’s instruc-
tions and warnings shall be read to and discussed with
the operator in the operator’s native language by the
purchaser/owner, making sure that the operator com-
prehends its contents.

Owner and/or user must study and maintain for future
reference the manufacturers’ instructions.

This manual should be considered a permanent
part of the machine and should remain with it if
machine is resold.

When ordering parts, please specify model and
serial number.

IMPORTANT SAFETY
INFORMATION

WARNING: When using this product basic precautions
should always be followed, including the following:

CAUTION: To reduce the risk of
injury, read operating instruc-
tions carefully before using.

1.

Read the owner’s manual thor-

oughly.  Failure to follow instruc-
tions could cause a malfunction
of the machine and result in
death, serious bodily injury and/
or property damage.

 2. Know how to stop the machine and bleed pressures

quickly. Be thoroughly familiar with the controls.

 3. Stay alert — watch what you are doing.

4.

All installations must comply with local codes. Con-
tact your electrician, plumber, utility company or the
selling distributor for specific details.

WARNING: Risk of asphyxiation.
Use this product only in a well
ventilated area.

5.

Avoid installing machines in

small areas or near exhaust
fans. Exhaust contains poison-
ous carbon monoxide gas; ex-
posure may cause loss of con-
sciousness and may lead to
death. It also contains chemi-

cals known in certain quantities, to cause cancer,
birth defects, or other reproductive harm.

WARNING: Flammable liquids can
create fumes which can ignite,
causing property damage or se-
vere injury.

CAUTION: Risk of fire. Do not add
fuel when the product is operating.

6.

Allow engine to cool for 2 min-

utes before refueling. If any fuel
is spilled, make sure the area

is dry before testing the spark plug or starting the en-
gine. (Fire and/or explosion may occur if this is not done.)

Gasoline engines on mobile or portable equipment
shall be refueled:

(a) outdoors;

(b) with the engine on the equipment stopped;

(c ) with no source of ignition, within 10 feet of the

dispensing point; and

(d ) with an allowance made for expansion of the fuel

should the equipment be exposed to a higher
ambient temperature.

In an overfilling situation, additional precautions are
necessary to ensure that the situation is handled in
an safe manner.

WARNING: Risk of explosion – do not spray flam-
mable liquids.

  7. Do not place machine near flammable objects as

the engine is hot.

WARNING: Risk of injection or se-
vere injury to persons - Keep clear
of nozzle - Do not touch or direct
discharge stream at persons. This
machine is to be used only by
trained operators.

CAUTION:  Hot discharge fluid. Do
not touch or direct discharge
stream at persons.

WARNING

RISK OF

ASPHYXIATION.

USE THIS  PRODUCT

ONLY IN A WELL

VENTILATED AREA.

WARNING

READ OPERATOR’S

MANUAL

THOROUGHLY

PRIOR TO  USE.

WARNING

HIGH PRESSURE

STREAM CAN

PIERCE SKIN AND

TISSUES.

CAUTION

RISK OF EXPLOSION:

DO NOT USE WITH

FLAMMABLE

LIQUIDS.

WARNING

Summary of Contents for TNT-503021E



























Reviews: