TTBIT Scrypt USB Stick Miner Official User Guide
Last updated on 27/01/2020
Page 8
4. Setup (Raspberry Pi)
If you purchased the miner from eBay link provided with this Guide, you will receive
software pack containing all required drivers. Download it and unpack the archive to
separate folder.
4a. Using monitor and peripherals
Navigate to “RPi” folder using file explorer.
Alternatively, you can copy the contents of “RPi” folder to your Raspberry Pi, using
any cloud service, ssh transfer or simply by plugging USB stick to your Raspberry Pi.
Once in the folder, you will find few example .sh files with bfgminer options there.
Doubleclick on chosen .sh file and select “Run in terminal” option. You will see
bfgminer window similar to this one:
If you getting error about missing libncurses.so.5 library, please install
libncurses5
package using your package manager.
Once you verify that everything is fine, you can press [Q] to exit bfgminer.
To edit pool credentials to your own, simply edit chosen .sh file (don’t forget to
backup first).
4b. Using console terminal
To run all of the above from terminal (if your Raspberry Pi doesn’t have monitor and
peripherals attached):
