Copyright © 2017 TTA All Rights Reserved.
Disclaimer
54
Appendix III
How to download log from PC GCS
1.Open the PC GCS, select Tool menu
2.Click Refresh button
3.Click Download button
4. Log is saved in the position as the orange word
Appendix IV
How to upgrade the firmware
1 download the upgrading tool from the following address:
https://www.dropbox.com/sh/371k17zp8guv5y9/AAB8fUGjJ7zCN8qRF0Do8x57a?dl=0
2 Open the upgrading tool,see the following picture:
3 Click the button
open
,select the correct firmware.
4 Click the button
Auto Update
,then the circular indicator will turn to be green.LED of
copter usually is OFF during upgrading.
5 Waiting until the down left corner to 100%.The circular indicator will also turned to red
and LED will flash red yellow green to self inspection. Waiting for a moment,the led will
flash normally,then upgrading is finished.
Summary of Contents for TIANNONG M6E-1
