INSTALLATION GUIDE
ACCESSORIES
Please make sure the angle of the adjuster on the seat base is set at 90 degrees (As shown in )
Attention
STEP by STEP
1.Install the caster wheels, gas lift piston and
piston covers onto the 5-star base.
Please note: when installing the caster
wheels, hold the wheels at a 90-degree
with a firm grip of the hand; and do not
use tools to knock it into place or the
ground as to prevent damage.
2.Mount the Z-support mechanism
underneath the seat base using 4x M8
screws. Please note: The screws for the
mechanism have been tightened
underneath the seat base and need to
be removed and reattached via the
provided allen key upon mechanism
placement.
3.Attach the 5-star base with gas list piston
onto the notch of the Z-support mecha-
nism that has now been attached to the
seat base.
4.Install the seat back onto the seat base.
5.Take out the 2x M8 screws from each side
of the seat back with the allen key and
align with seat base. Reinsert M8 screws
and tighten with allen key.6.Attaching the
side covers. Keep the hole sites of the
side covers aligned with the M8 screws of
the seat back; and then slowly, but firmly
press to fix the side covers. Please note:
to prevent accidental damage, do not
bang it into place with force.
www.ttesports.com
Seat Back x 1
Seat Base x 1
Mechanism x 1
Five-star base x 1
Caster wheels x 5
Gas lift piston x 1
Piston cover x 1
Side Cover x 2
Allen key x 1
M8 screw x 8
Pre-mounted
