TT Aviation TIANNONG M6E-X User Instructions Download

Page: 55 / 78

Beijing TT Aviation Technology Co., Ltd.

Add: No.1 TTA Building, Niantou Industrial Park ,Changping District,Beijing, China

www.ttaviation.org

6.2 Parameters Settings

6.2.1 Sensor

(1) Accelerometer calibration

Place the UAV on a horizontal platform, click the button “Accelerometer calibration”, LED

will flash in red,green,yellow alternately. Solid

green

LED means successful

calibration,data will be stored by restart.

(2) Compass calibration

▼

Situations when need calibration

1) Everytime you transport the drone to another place, the compass have to be

calibrated .

2) If you fly in the mountain , every time you move from one hill to the other one , do the

compass calibration .

3) Everytime you get new drone or a repaired drone , do the compass calibration .

4) Once you find that the drone cannot stay when it's hover in GPS (it might be moving like

a cycle ), do the calibration .

▼

Calibration order

Two kinds of method of compass calibration:

Click the button “Compass calibration” to enter into calibration status.

Switch switch “E” back and forth more than 4 times to enter into calibration status.

▼

Calibration Step

Confirm GCS communication well, compass installation correct and copter outside.

Summary of Contents for TIANNONG M6E-X















































































Search results

Summary of Contents for TIANNONG M6E-X

Reviews:

Related manuals for TIANNONG M6E-X

Brands by name

Popular brands

TT Aviation TIANNONG M6E-X, User Instructions

Search results

Summary of Contents for TIANNONG M6E-X

Reviews:

Related manuals for TIANNONG M6E-X

Brands by name

Popular brands