TT Aviation TIANNONG M6E-X User Instructions Download

Page: 41 / 78

Beijing TT Aviation Technology Co., Ltd.

Add: No.1 TTA Building, Niantou Industrial Park ,Changping District,Beijing, China

www.ttaviation.org

5.8 Route Planning

5.8.1 Mapping

Click [Ground Plan]

to enter the Plot Mapping page

1) Press [Block management]

to view the marked blocks and online blocks nearby.

[

My Ground

]: User have rights to operate ground in this list, such as performing, sharing,

editing, etc. This ground list includes the ground created by you and the ground added

from the [Around ground].

[

Around Ground

]: Ground will be displayed here when its position is nearby and it has

been posted to the public by others or yourself.

Figure 5.8 Mission Planning Procedure

Summary of Contents for TIANNONG M6E-X















































































Search results

Summary of Contents for TIANNONG M6E-X

Reviews:

Related manuals for TIANNONG M6E-X

Brands by name

Popular brands

TT Aviation TIANNONG M6E-X, User Instructions

Search results

Summary of Contents for TIANNONG M6E-X

Reviews:

Related manuals for TIANNONG M6E-X

Brands by name

Popular brands