Beijing TT Aviation Technology Co., Ltd.
Add: No.1 TTA Building, Niantou Industrial Park ,Changping District,Beijing, China
www.ttaviation.org
25
4.4 Operation Instruction
1) Start and Self-inspection
Check all connections to confirm their condition first. Press the maser power switch of
charger to power on. LCD monitor and LED will turn on,meanwhile the buzzer will turn on.
After buzzer ring completely, it means the charger has finished the power-on and
self-inspection procedure.
2) Working Mode
The charger has 2 modes, charging & storage for user to chose according to the
requests. When charging manager was plugged, charger will recognized it
and
switch to constant working mode automatically. Charging station will work constantly
assisted with charging manager, after operations once being executed.
Charging mode
: Battery will be charging rapidly in this mode.
Storage mode
: The battery is suggested to be maintained every 15 days when no
use for long time. Battery needs to be maintained in storage mode when the
endurance declines apparently or the voltage difference between each battery cell
beyond 50mv. In storage mode, charger will try to balance the voltage of each battery
cell to 3.84--3.86 by charging,discharging and balancing in small current.
Constant working mode
: Charging station will recognize and switch to constant
working mode after the charging manager is plugged.
3) Working Mode Settings
Chose the proper position of current switch to set the working mode according to
battery capacity and user requirement.
4) Charging Introduction
Long press the charging button for 2 second to enter into charging mode, or it will
start charging automatically after 10 seconds without any operations.
1. Red lamp on constantly: In charging status,monitor display real-time
charging status dates.
2. Green lamp on constantly: Charging completely
