Copyright © 2017 TTA All Rights Reserved.
M8A pro Use Introduction
23
5.2.5 Low Voltage Protection
5.2.5.1 Low Voltage Protection Settings
Five voltage protection has been provided:close,return to home point,hovering,auto
landing,hovering and then landing. User could choose the one suitable.
The default is
auto landing.
5.2.5.2 Alarm Voltage Settings
Settings of first alarm and second alarm.It’s recommended to 43.6V for the first
alarm and 43.1V for second alarm.
LED will flash yellow triple when get to the first alarm level;LED will flash rapidly when
get to the second alarm level,copter will react as the low voltage settings,such as return to
home or landing.
5.2.5.3 Voltage Calibration Settings
Flight controller voltage sensor need to be calibrated if flight controller voltage sensor
result is different from real voltage.Real battery voltage should be filled in measured
voltage,flight controller voltage will be calibrated by clicking save.
It’s unnecessary to set
by user as calibration has been done before delivery.