-5-
When the pump is delivered, first perform the following checks.
Product Inspection
While unpacking, inspect the product for damage during shipment, and make sure all bolts
and nuts are tightened properly.
Specification Check
Check the model number to make sure it is the product that was ordered. Be certain it is the
correct voltage and frequency.
Accessory Check
Verify that all accessory items are included in the package.
LSC Type
• Hose Band ...................................................................... 1 pc
• ø25mm Hose Coupling with Union Hose Band ........ 1 set
• Operation Manual ........................................................ 1
LSP Type
• ø25mm Hose Coupling with Union Hose Band ......... 1 set
• Suction Hose with Union (5m) ..................................... 1 set
• Suction Attachment ...................................................... 1 set
• Operation Manual ........................................................ 1
Note:
If there is any problem with the product as shipped, contact your nearest dealer or Tsu-
rumi representative at once.
Major Standard Specifications
Applicable Liquids Consistency and Temperature Cleaning Water, Water on floor Puddles (LSC1.4S).
Residual water, Puddles (LSP1.4S) ; 0 ~ 40°C
Pump
Impeller
Semi-Vortex Type
Shaft Seal
Double Mechanical Seal
Bearing
Shielded Ball Bearing
Specifications
Dry Submersible Induction Motor (2-Pole)
Insulation
Class E
Protection System (built-in)
Miniature Protector
Turbine Oil ISO VG32 (non-additive)
Lubricant
Connection
Hose Coupling
Motor
Stadard Specifications (50/60 Hz)
LSP.1.4S
LSC1.4S
25
25
Single
Single
Capacitor Run
Capacitor Run
Model
Bore
(mm)
0.48 (2/3)
0.48 (2/3)
Output
kW (HP)
8/9(26.2/29.5)
11/12(36/39)
Max. Head
m(ft.)
0.06(15.8)
—
Max. Capacity
m
3
/min(GPM)
12.5 (27.6)
12.0 (26.5)
Weight
kg (lbs.)
Phase
Starting Method
Note:
The mass (weight) given above is the dry weight of the pump itself, not including the
cabtyre cable.
3 PRIOR TO OPERATION
Product Specifications
CAUTION
Do not operate this product under any conditions other than those for which
it is specified. Failure to observe this precaution can lead to electrical shock,
electrical leakage, fire, water leakage or other problems.