Date Printed: 6/21/2021
INST-21999-0265
1
Installation instructions for
Multi-User Breathable Air System
•
Failure to understand and follow the warnings and
instructions may cause Injury or Death.
•
Failure to read and understand all warning and
instructions on the products you are using (paints,
solvents, epoxy resins, pesticides, etc.) may cause
Injury, Disease, or Death.
•
Not for use with petroleum based powered air
compressors.
•
All maintenance and operational instructions must be
followed. Failure to follow these instructions may
result in injury or loss of life.
•
All instructions for the carbon monoxide (CO) monitor
must be followed exactly.
•
Do not attempt to use the respirator without reading
and understanding the instructions of the product.
•
Never wear supplied air respirators in any atmosphere
that may contain levels of contamination which are
unknown or may be Immediately Dangerous to Life or
Health (IDLH).
•
You must use a supplied air respirator that adheres to
the guidelines set by the American National Standard
Practices for Respiratory Protection Z88.2.
•
You must use a supplied air respirator that adheres to
the statutes set forth by your federal, state, and local
Occupational Safety and Health organizations.
•
This breathing air system reduces but does not
eliminate your exposure to inhaled chemicals or
contaminants. It Does Not provide total protection.
•
If you have ever experienced breathing complications
while around or after exposure to paint, isocyanates,
solvents, etc. DO NOT USE this breathing air system.
•
If you are sensitized to paint, isocyanates, solvents,
etc., DO NOT USE this breathing air system, it WILL
NOT protect you.
•
DO NOT USE this product if you cannot understand the
warnings or instructions contained within this manual.
•
If these warnings and instructions lead you to believe
that you should not use this breathing air system or
that it will not protect you, DO NOT USE IT, regardless
of any instructions or statements from another source
such as an employer, a parts supplier, product
manufacturer, etc., that indicate you will be protected.
•
YOU ARE SOLELY RESPONSIBLE for any injury, disease,
damage, or death caused by failure to follow these
warnings and instructions.
•
Do not use filtered air from panel to run air tools or
spray guns.
Outlet Air
.
Inlet Air
Installation Instructions
21999-0265
WARNING!!!
•
Read supplied CO monitor manual.
•
Send in warranty registration for CO monitor
•
Mount panel to wall using appropriate hardware.
•
Connect inlet from the compressed air system.
•
Wire in the wall pack adaptor to the CO Monitor.
(a skilled electrician should be used with any
electrical procedure)
•
Set respirator to respective manufacture’s
specifications.
•
Note: Inlet and Outlet Air locations specified
below. Outlet air is for breathing equipment only.
•
Verify monitor is on when in use and system
under pressure; Alarm will sound if no pressure is
present.
