USER GUIDE FOR MTR-X SET
Publication 696-082 RevA
©2022 TSO Products LLC
Page 1 of 2
What’s Included with Your MTR-X Set
Qty
Item & Description
1
MTR-X Triangle Body
Precision system triangle body, anodized
1
Guide Rail Connector Assembly
Enables attachment of the triangle to a
compatible guide rail
4
M6 Edge Index Pins
Two 12mm long for forming a shoulder;
two 25mm long for squaring MFT/3
4
Socket Head Cap Screw, M6x1.0-10
Used to attach clamping angles to trian-
gle face
2
M8 Knobs
Secures protractor assembly to the face
of the triangle
2
M8 Washers
Place between M8 knobs and pointer
when attaching protractor assembly
1
Pointer
Aluminum pointer with non-parallax
viewport for precision angle
fi
nding
2
Triangle Dogs
Use these dogs to secure the triangle and
pointer assembly to MFT-style worktop
2
Clamping Angles (6”)
Secure to triangle face to transform
triangle into clamping angle
1
Hex Driver
Use this 3mm hex driver to secure guide
rail connector to your guide rail
1
Storage Tin
A handy cubby for all of the small com-
ponents included in the MTR-X Set
1
Systainer Foam Insert
Custom CNC-cut Kaizen foam insert to
store the triangle and all accessories
1
Systainer ID Card
Fits in the ID card pocket located on
systainer exterior
Questions, Comments or Ideas?
We thrive on your feedback, so please let us know if you
have any comments, concerns, feedback, or ideas on how
we can continuously improve our products.
We
ʼ
re easy to reach! In the United States, call us toll-
free at 800-727-0311. For our international customers,
call us at 239-236-5526. To send us a message, visit us at
www.tsoproducts.com
or email
,
and we
ʼ
ll get back to you as soon as possible.
Thanks for purchasing this genuine TSO Product.
Should
you have any product questions or issues, please contact us
toll-free at 800-727-0311 (U.S.), 239-236-5526 (international),
email us at
, or visit
www.tsoproducts.
com/support
.
Assembling Your MTR-X Set
In addition to using the triangle standalone, the MTR-X can
be con
fi
gured in the following ways:
• Triangle with shoulder, formed by hand-screwing the
Edge Index Pins
into the face of the triangle to create a
projected edge.
• Triangle with clamping angles, assembled by attach-
ing the two
Angles
to the face of the triangle with the
included M6x12 screws.
• Triangle as variable angle guide rail square, when used
with the included
Guide Rail Connector
.
• Triangle with protractor, assembled by following the
steps below.
• Place both
Triangle Dogs
on a
fl
at work surface with
chamfer lip facing up. A foolproof way to ensure the
dogs are always oriented correctly is to place them
with the “double groove” detail facing upward.
• Place
Triangle Body
on top of the
Triangle
Dogs
.
• Place the
Pointer
on
top of the
Triangle
Body
,
fi
tting over both
Triangle Dogs
.
• Place the
M8 Washers
on top of the
Pointer
,
and then screw the red
M8 Knobs
hand tight.
