Page
70
of
110
The Inputs/Outputs Menu
The Inputs/Outputs Menu allows the properties of the physical Inputs and Outputs of the SAM-Q-SDI to be
configured as required.
The Inputs and Outputs Sub-Menus
Selecting the Inputs Sub-Menu allows physical inputs BNC 1 and BNC 2 to be configured to work with either
SDI or MADI Sources as required.
In the example below, BNC Input 1 has been configured to work with SDI sources, whilst BNC Input 2 has
been configured to accept MADI sources.
To switch either BNC Input between SDI and MADI, select the Audio Select button for the corresponding
BNC Input and rotate the large encoder.
To apply the change, either push the large encoder or press the corresponding Audio Select button.
