Operating QUESTempº 34 & 36
Run
12
Run
The run mode begins a session in memory and logs the data.
1.
Begin a session by pressing the
Run/Stop key
from the view mode (or measurement
view). An asterisk in the lower right corner indicates the run mode.
To toggle through the views, press the up or down arrow.
WBGTi
66.7
º
F
1
WBGTo
68.6
º
F
Run indicator
Figure 1-8: Run mode indicator
2.
End the session by pressing the
Run/Stop key
again. (The session will stop recording
when the asterisk is no longer displayed.)
NOTE:
If the logging memory is full or if there are no sensors plugged into the unit,
attempting to enter the Run mode will result in an error message. If the memory
capacity is exceeded, the asterisk in the lower right corner of the display will
turn into an “F” and the memory remaining screen will show “0.0”.
