LIMITATION OF WARRANTY AND LIABILITY
(effective February 2015)
(For country-specific terms and conditions outside of the USA, please visit
Seller warrants the goods, excluding software, sold
hereunder, under normal use and service as described in
the operator's manual, to be free from defects in
workmanship and material for
24 months
, or if less, the
length of time specified in the operator's manual, from
the date of shipment to the customer. This warranty
period is inclusive of any statutory warranty. This limited
warranty is subject to the following exclusions and
exceptions:
a. Hot-wire or hot-film sensors used with research
anemometers, and certain other components when
indicated in specifications, are warranted for 90 days
from the date of shipment;
b. Pumps are warranted for hours of operation as set forth
in product or operator’s manuals;
c. Parts repaired or replaced as a result of repair services
are warranted to be free from defects in workmanship
and material, under normal use, for 90 days from the
date of shipment;
d. Seller does not provide any warranty on finished goods
manufactured by others or on any fuses, batteries or
other
consumable
materials.
Only
the
original
manufacturer's warranty applies;
e. This warranty does not cover calibration requirements,
and seller warrants only that the instrument or product
is properly calibrated at the time of its manufacture.
Instruments returned for calibration are not covered by
this warranty;
f. This warranty is
VOID
if the instrument is opened by
anyone other than a factory authorized service center
with the one exception where requirements set forth in
the manual allow an operator to replace consumables
or perform recommended cleaning;
g. This warranty is
VOID
if the product has been misused,
neglected, subjected to accidental or intentional
damage, or is not properly installed, maintained, or
cleaned according to the requirements of the manual.
h. Unless specifically authorized in a separate writing by
Seller, Seller makes no warranty with respect to, and
shall have no liability in connection with, goods which are
incorporated into other products or equipment, or which
are modified by any person other than Seller.
The foregoing is
IN LIEU OF
all other warranties and is
subject to the
LIMITATIONS
stated herein.
NO OTHER
EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR
PARTICULAR PURPOSE OR MERCHANTABILITY IS
MADE. WITH RESPECT TO SELLER’S BREACH OF
THE IMPLIED WARRANTY AGAINST INFRINGEMENT,
SAID WARRANTY IS LIMITED TO CLAIMS OF DIRECT
INFRINGEMENT AND EXCLUDES CLAIMS OF
CONTRIBUTORY OR INDUCED INFRINGEMENTS.
BUYER’S EXCLUSIVE REMEDY SHALL BE THE
RETURN OF THE PURCHASE PRICE DISCOUNTED
FOR REASONABLE WEAR AND TEAR OR AT
SELLER’S OPTION REPLACEMENT OF THE GOODS
WITH NON-INFRINGING GOODS.
TO THE EXTENT PERMITTED BY LAW, THE
EXCLUSIVE REMEDY OF THE USER OR BUYER,
AND THE LIMIT OF SELLER'S LIABILITY FOR ANY
AND ALL LOSSES, INJURIES, OR DAMAGES
CONCERNING THE GOODS (INCLUDING CLAIMS
BASED ON CONTRACT, NEGLIGENCE, TORT,
STRICT LIABILITY OR OTHERWISE) SHALL BE THE
RETURN OF GOODS TO SELLER AND THE REFUND
OF THE PURCHASE PRICE, OR, AT THE OPTION OF
SELLER, THE REPAIR OR REPLACEMENT OF THE
GOODS. IN THE CASE OF SOFTWARE, SELLER WILL
REPAIR OR REPLACE DEFECTIVE SOFTWARE OR IF
UNABLE TO DO SO, WILL REFUND THE PURCHASE
PRICE OF THE SOFTWARE. IN NO EVENT SHALL
SELLER BE LIABLE FOR LOST PROFITS, BUSINESS
INTERRUPTION, OR ANY SPECIAL, INDIRECT,
CONSEQUENTIAL OR INCIDENTAL DAMAGES.
SELLER SHALL NOT BE RESPONSIBLE FOR
INSTALLATION, DISMANTLING OR REINSTALLATION
COSTS OR CHARGES. No Action, regardless of form,
may be brought against Seller more than 12 months after
a cause of action has accrued. The goods returned
under warranty to Seller's factory shall be at Buyer's risk
of loss, and will be returned, if at all, at Seller's risk of
loss.
Buyer and all users are deemed to have accepted this
LIMITATION OF WARRANTY AND LIABILITY, which
contains the complete and exclusive limited warranty of
Seller. This LIMITATION OF WARRANTY AND
LIABILITY may not be amended, modified or its terms
waived, except by writing signed by an Officer of Seller.
Service Policy
Knowing that inoperative or defective instruments are as
detrimental to TSI as they are to our customers, our
service policy is designed to give prompt attention to any
problems. If any malfunction is discovered, please
contact your nearest sales office or representative, or call
T
SI’s Customer Service department at 1-800-874-2811
(USA) or (651) 490-2811.
Trademarks
TSI
®
, TSI logo, Alnor
®
, and Balometer
®
are registered
trademarks of TSI Incorporated.
.
Summary of Contents for ALNOR LOFLO BALOMETER Series
Page 1: ...ALNOR LOFLO BALOMETER CAPTURE HOOD OWNER S MANUAL P N 116620001 REV 09 FEBRUARY 2016 ...
Page 3: ...iii iii ...
Page 4: ......
Page 6: ......
