8
Chapter 3
Log Mode/Log Settings
You can set Log Mode to Manual, Auto-save or Cont-key.
Manual mode does not automatically save data, but instead
prompts you to save a sample.
In Auto-save mode, you manually take samples that are
automatically logged.
In Cont-key mode, you start taking readings and logging by
pressing the
key. The instrument will continue taking
measurements until the
key is pressed again.
Auto-save and Cont-Key modes have the following additional
Log Settings:
Mode
Log Settings
Auto-save
Log Interval
Cont-key
Log Interval
Pressing the
keys simultaneously will lock the keypad to
prevent unauthorized adjustments to the instruments. To
unlock the keypad, press the
keys simultaneously.
Delete Data
Use this to delete all data, delete test or delete sample.
% Memory
This option displays the memory available. Delete All, under
Delete Data, will clear memory and reset the memory available.
LogDat2
TM
Downloading Software
The Alnor AXD620/Airflow Instruments PVM620 comes with special
software called LogDat2 Downloading Software, which is designed to
provide you with maximum flexibility and power. To install this
software on your computer, follow the instructions on the label of the
LogDat2 CD-ROM.
To download data from the Alnor AXD620/Airflow Instruments
PVM620, connect the supplied computer interface USB cable to the
Alnor AXD620/Airflow Instruments PVM620 and to a computer USB
port. Then run the LogDat2 downloading software. Within the
LogDat2 software, either select the tests to be downloaded or double-
click on a test to open it.
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
