TSI Instruments AccuBalance 8370, Operation And Service Manual

Page: 32 / 58

24 Chapter 2
1 Build the 1 ft x 5 ft frame structure as shown in Figure 10 using
four 2 ft aluminum frame tubing pieces, two 1x tube connectors,
two 1 ft aluminum frame tubing pieces, and four right-angle
tubing connectors. Remember to construct the frame so that all
Velcro surfaces face in (toward the center of the structure).
Notice : Make sure that all support pole cups in the aluminum frame
tubing pieces are facing downward.
Figure 10 . Assembled 1 ft x 5 ft frame
2 Unfold the 1 ft x 5 ft fabric hood.
Continue with steps 3 through 10, beginning on page 20.