TSI Instruments AccuBalance 8370, Operation And Service Manual

Page: 20 / 58

12 Chapter 1
To complete the assembly of the 2 ft x 2 ft hood, follow these six steps:
1 Place the base of the A
CCU
B
ALANCE
on the floor.
2 Lift the top of the fabric. Insert one end of a support pole into its
pole mount in the base of the A
CCU
B
ALANCE
. There is a cup in
each corner of the frame to accept the other end of each support
pole. Helpful Hint: This step is made simpler by temporarily
resting the opposite corner of the fabric top on a table edge as
shown in Figure 5.
Figure 5 . An easy way to begin assembly