manualshive.com logo in svg

TSI Instruments 3082, Operation And Service Manual

The TSI Instruments 3082 is a cutting-edge product designed for precision measurements. To help you get started quickly, we offer a comprehensive Quick Start Manual that you can easily download for free from our website. This manual provides step-by-step instructions to ensure you make the most of your product.

Share
Download
background image

  

3-1 

C H A P T E R   3

 

M o v i n g   a n d   S h i p p i n g  
t h e   E l e c t r o s t a t i c  
C l a s s i f i e r  

Use the information in this chapter to prepare the Model 3082 Electrostatic 
Classifier for moving, shipping, or storage.  
 
 

 

W A R N I N G

 

  The Model 3082 Electrostatic Classifier weighs over 30 lbs and, with a 

DMA attached, can weigh up to 44 lbs. Follow precautions for lifting a 
heavy object: 

  Enlist another person to help. 

  Transport the instrument on a cart whenever possible. 

  Keeping the instrument close to your body, lift with your legs while 

keeping your back straight. 

Recommended precautions for transporting the classifier: 

  Slot both hands beneath the instrument or place one hand beneath the 

instrument and the other on the back handle. 

  Never use the DMA as a handle when moving the classifier.  

  Remove the DMA and carry separately when moving the classifier. 

 
 

 

C a u t i o n

 

Do not

 ship the Model 3082 Electrostatic Classifier with the lead 

shielding, the Neutralizer, or the DMA installed, or damage to the 
classifier may result. 

 
 

 

C a u t i o n

 

  The shipping containers and packaging provided with the Model 3082 

Electrostatic Classifier are designed to protect the instrument. Save and 
use the provided container and packaging to ship the instrument for 
service; use of other packaging may result in damage to the instrument. 

Summary of Contents for 3082


































































































































































































































Reviews:

No comments

Related manuals for 3082

ABB SACE Tmax XT Series Manual preview
SACE Tmax XT Series
Brand: ABB Pages: 11
Makerfire N10 Instructions Manual preview
N10
Brand: Makerfire Pages: 10
GBC AIO Quick Start Manual preview
AIO
Brand: GBC Pages: 8
KAPSCH T600 Operator And Maintenance Manual preview
T600
Brand: KAPSCH Pages: 57
CAB 4712 Operator'S Manual preview
4712
Brand: CAB Pages: 13
CAB 4712 Assembly Instructions Manual preview
4712
Brand: CAB Pages: 30
CAB 5314 Operator'S Manual preview
5314
Brand: CAB Pages: 17
CAB 3014 Service Manual preview
3014
Brand: CAB Pages: 33
C. Crane Camping Equipment Instruction Manual preview
Camping Equipment
Brand: C. Crane Pages: 8
C-Pro Direct ADM Fittings Manual preview
ADM
Brand: C-Pro Direct Pages: 4
C-Pro Direct ADM Instructions For Use preview
ADM
Brand: C-Pro Direct Pages: 4
IBS Scherer M-500 Translation Of The Original Instructions preview
M-500
Brand: IBS Scherer Pages: 64
Gearmore T230 Operation, Service And Parts Manual preview
T230
Brand: Gearmore Pages: 47
Xtool A30 Pro Manual preview
A30 Pro
Brand: Xtool Pages: 51
H-TEC Education D201 Operating Instructions Manual preview
D201
Brand: H-TEC Education Pages: 16
H-TEC Education A129 Operating Instructions Manual preview
A129
Brand: H-TEC Education Pages: 12
Rain Harvesting Air Gap Installation And Specification Manual preview
Air Gap
Brand: Rain Harvesting Pages: 2
Biosonic Suvi Elite Quick Start Manual preview
Suvi Elite
Brand: Biosonic Pages: 2

Brands by name

Popular brands

Load more brands