5
Battery Charging and Replacement
The recorder will start charging automatically
when connected to USB-connector of the PC
by the shipped USB-cable. LED flashes once –
the charging starts. While charging, the recorder’s
LED is flashing gradually with a five-second interval.
After the rechargeable battery is fully charged,
the LED will flash without intervals. Switch
the recorder off the PC. After a short pause,
the LED flashes once.
Battery replacement. To replace the battery
unscrew the lid (position 5). Take the battery out.
Insert the new one into the case (carefully observe
the polarity – the positive battery contact is
to be upward). Screw the lid (position 5).
In Box
1. Recorder (rechargeable battery installed);
2. USB cable;
3. Software CD;
4. Instructions;
5. Warranty certificate
